Difference between revisions of "Clipping"

From WebRef.org
Jump to navigationJump to search Wet Wipes
(Created page with "#An electrical signal is clipped if the signal level exceeds the capabilities of the amplifier. It is a distortion of the signal. #Refers to a type of distortion that occurs when...")
(No difference)

Revision as of 10:57, 10 September 2011

  1. An electrical signal is clipped if the signal level exceeds the capabilities of the amplifier. It is a distortion of the signal.
  2. Refers to a type of distortion that occurs when an amplifier is driven into an overload condition. Usually the "clipped" waveform contains an excess of high-frequency energy. The sound becomes hard and edgy. Hard clipping is the most frequent cause of "burned out" tweeters. Even a low-powered amplifier or receiver driven into clipping can damage tweeters which would otherwise last virtually forever. Source: http://www.owenscorning.com/around/sound/glossary.asp


Sponsor: CHEMICAL GUYS GAP11264 - WET MIRROR FINISH ULTRA SLICK GLOSS MAGNIFIER (64 OZ - 1/2 GALLON)

Vape Juice, eLiquid